NOMEX
Operating Manual - Measurements with the NOMEX Multimeter
62
D909.131.00/02 en
Operational Readiness of the NOMEX System
when Data are Loaded
1. If the application of the loaded data does
not match the current settings, the application
shown in the status line of the measuring win-
dow will be grayed out.
➔
The current settings will be preserved and
you can still perform measurements with
these settings.
➔
When you perform a new measurement,
the currently displayed measurements will
be discarded and a new data set will be
created. If the currently displayed measure-
ments were not yet saved, a message will
appear and you can save them, if required.
2. If the measurement settings of the loaded data
do not completely match the current settings,
the settings shown in the status line of the
measuring window will be grayed out.
➔
The current settings will be preserved and
you can still perform measurements with
these settings.
➔
When you perform a new measurement, it
will be appended to the currently displayed
measurements.
7.7
Deleting Measurement
Data
7.7.1 Deleting All Measurement
Data
•
To remove all measurement data from
the display, click the
Delete measure-
ments and reset display
button.
➔
The measurement data will be deleted right
away without any further confirmation.
➔
If the existing data are not yet saved, a warning
will appear and you can save them, if required.
7.7.2 Deleting Individual
Measurement Data
•
In the measuring table, click the measurement
data set(s) to delete.
•
Select menu
Edit
→
Delete selected measure-
ments
or context menu
Delete selected mea-
surements
or press the
Del
key.
➔
After confirmation of the prompt, the selected
data will be removed from the measurement
table.
•
Save the changes as described in section
.
