Pict. 11 - The properly-tuned first layer
When printing the extruder motor can reach up to 55°C, that is completely
fine
, they are designed to run up to 100 °C.
6.3.9.1 Bed level correction (kit only)
Bed level correction is an advanced feature that is designed to allow advanced users to
correct for the slightest imperfections in the first layer. This feature can be found in
LCD Menu - Calibration
-
Bed level correction.
For example, if the first layer seems to be
ever so slightly more squished on the right side, you can virtually raise the nozzle by
+20
microns on the right side. Settings are available for Left, Right, Front and Back. The limit is
+-100 microns and even +-20 microns can make a huge difference. When you are using this
function, perform small incremental changes. A negative value will cause the bed to lower in
the selected direction.
28
