6.3.2.1 Double-sided textured PEI powder-coated spring steel sheet
Scratchproof, hard to damage
PLA prints with a small contact area
may need a brim
Transfers texture to prints
PLA prints with a huge footprint (one
side 18cm+) may warp
More forgiving Live Adjust Z setting
Live Adjust Z value needs to be
changed if you switch sheets
No need for Windex with PETG
Never clean with acetone
No need for glue stick with FLEX
Prints automatically detach after sheet
cools down
First layer can be more squished
compared to smooth sheets
Powder coating directly on metal makes it very hard to damage this build plate. If a heated
nozzle crashes into it, the metal can dissipate the heat. Powder coating also gives the
surface a distinct textured look that will be visible on your prints.
The textured surface hides most of the mechanical damage caused by tools. Only the top of
the small bumps can be scratched, which will not imprint on the bottom of the model.
Never clean the textured powder coated sheet with acetone!
Doing so will
create microfractures in the PEI texture, which will make the surface deteriorate
over time.
This surface is used on our print farm, look at the printed parts you have on your printer for
reference.
16
