37
EDDYSENSOR Operating Manual
Appendix
Module 1030 filter tables
(Module 1031 table is given in the module description)
The method given in the 1030 module description on how to
set the filters F1 and F2 is sufficient for most normal applica-
tions. However, for completeness the full F1 and F2 filter tables
are given in the appendix. These may be needed in excep-
tional circumstances.
To achieve a reasonable bandwidth we recommend:
V
Line
/ 4:
Switch setting HPH/HPL
V
Line
x 2:
Switch setting LPH/LPL
Select the value nearest to the speed calculated (for both the
low pass and high pass filters).