iv
EDDYSENSOR Operating Manual
General information
Due to the nature of eddycurrent testing, strong
electro-magnetic fields could affect the test results.
Areas of use
This equipment is intended for use exclusively in collecting
and processing eddycurrent test data in areas where there
is no danger of explosion.
Electro-magnetic
compatibility
This equipment was tested for electro-magnetic compatibil-
ity according to EN 55011 Group 1, Class A and EN 50082-
2.
Operative restrictions
Using this equipment in a residential area can lead to electro-
magnetic interference and therefore requires special authori-
zation from the national regulatory agency for post and tel-
ecommunications (BAPT).
Installation site
requirements
Installation instructions
• Temperature range: see "Technical Data"
• Flat, level installation surface
• Equipment must be far enough away from the wall to open
the rear door easily and access the interior
(For actual dimensions, see "Technical Data" at the back of
the operating manual.)
Technical data
The technical data relevant to this equipment is listed at the
back of the Operating Manual.