Proxim ORiNOCO AP-2500 Скачать руководство пользователя

Страница: 167 / 277

167

Public Space Parameters

Enter an

IP Address

for the subscriber or leave the field blank.

•

If left blank, the AP fills in this field automatically after a subscriber logs in.

If authorizing a subscriber based on user name and password, enter a

User Name

and

Password

for the

subscriber in the fields provided.

NOTE:

User Name and Passwords are case-sensitive.

Enter the subscriber’s allowed access time in the

Expiration Time

fields (in hours and/or minutes).

•

If you leave these fields blank or set them to 0, the subscriber will never time out.

•

If you enter hours and/or minutes, the timeout counter will begin as soon as you click

•

After the subscriber has timed out, he/she must re-subscribe to the service.

10. Place a checkbox in the

Countdown after Login

box to enable displaying the remaining time to the user.

11. Configure the

Amount Paid

field, if desired. The AP automatically fills in this fields after a successful credit

card purchase.

12. Configure the optional

User Alias

fields, if desired. These are for notes only and do not have an impact on the

authentication process.

13. Define the

Upstream

and

Downstream Bandwidth

limits for the user in Kbps. The user’s bandwidth is not

limited if you leave this blank or set it to 0.

14. Click

to add the subscriber.

15. Add additional subscribers, if desired.
16. When finished, click the back arrow button to return to the previous screen.

Removing a Subscriber

Follow these steps to remove a subscriber from the Authorized Subscribers Table:

Click

Subscriber

Authorized

Click

Edit

Locate the entry for subscriber you want to delete and set

Status

Destroy

Click

to remove the entry.

Click the back arrow button to return to the previous screen.

NOTE:

An active subscriber will immediately lose his/her access to the Internet if the subscriber’s entry is deleted.
You can also delete active subscribers from

Monitor

Subscribers

. See

Current Subscribers Table

Содержание ORiNOCO AP-2500






















































































































































































































































































Результаты поиска

Содержание ORiNOCO AP-2500

Отзывы:

Похожие инструкции для ORiNOCO AP-2500

Бренды по названию

Популярные бренды

Proxim ORiNOCO AP-2500, Руководство пользователя

Результаты поиска

Содержание ORiNOCO AP-2500

Отзывы:

Похожие инструкции для ORiNOCO AP-2500

Бренды по названию

Популярные бренды