6.4: To fix the Steering Assembly to the model, first remove the hinge pin on the Front Lower Susp.
Arm by removing the screws securing it, and pushing it out. Put the Steering Assembly into place,
making sure the end of the dogbone register in the drive cup of the Front Differential, and replace
the hinge pin as shown. Then remove the e-clip from one side of the hinge pin in the Front Upper
Susp. Arm, remove the pin to lover the arm in place, and then replace the pin and secure with e-clip.
Finally, secure the Steering Links to the Steering Hub using Ball Head Mech Screw 3*11 from bag 8.
Move the Front Suspension Assembly with your hands and turn the Wheel Hex to ensure a correct fit
and freedom of motion for the parts in this assembly.
