9.0: Electronics
Youtube guide for this stage:
Requires following bags:
21:
61007 Receiver Case
61008 Motor Secure Plate
61009 Motor Mount
61010 Motor Heat Guard
61012 Cooling Fan & Guard
61013 Steel Pinion Gear (14T)
61024 Countersunk Mech Screw 3*8
61028 Brushless Motor 3000KV
13308 Brushless ESC (80A)
Receiver from bag 23
9.1: Attach the Motor Secure Plate -61008- to the motor using Countersunk Mech Screws 3*8, and
the Pinion Gear -61013- with the grub screw. For the Pinion Gear, make sure it is fastened securely
against the flat side of the motors drive shaft. Slide the Heat Guard onto the Motor –missing from
bag in initial production! Included separately- .
9.2: Attach the Motor Mount to the Chassis using the Roundhead screws, and then fasten the Motor
Assembly, so that the back of the Motor is cradled by the Motor Mount.
9.3: If you wish, secure the Receiver Case -61007- to the Chassis using Countersunk Self-tapping
Screws 3*8 in what should be the only remaining available position on the Chassis. Some prefer not
to use this and instead attach the ESC directly to the steel chassis because it affords them more space
and freer placement of electronics.
