10.3: Once battery is charged, put 8xAA batteries in transmitter (not included), and connect the LiPo
battery to the car. Before turning on the model, unscrew the the servo arm from the servo and
detach it. Now turn the car and transmitter on, and ensure the setting st.trim on the controller is at
0. The Servo should be centered now, so you can reattach the servo arm making sure to keep the
front wheels as straight as possible!
Your model should now be fully assembled and ready to run! If transmitter and receiver are not
communicating correctly, please consult the booklet included with the transmitter. All that remains is
to place the car body on top and attach using body pins.
Additional notes:
Due to a packing error in the first run of this kit, there are several screws missing
from the construction procedure. These are 2 from each side of the front and rear gearbox, and the
screws to attach the rear brace to the gearbox as shown in pictures. Use the additional bag of
identical self-tapping screws in all these locations.
The Motor Fan would also be missing from its bag due to packing error, but will be included
separately.