8.0: Shock Absorbers
Youtube guide for this stage:
Requires following bags:
1:
60003 Shock Absorber
60040 Shock Absorber Link Ball Ø5.8
60041 Shock Balls Ø5.8
60081 Cap Head Self-tapping Screw 3*16
18044 Round Head Screw 3*25
85793 Nylon Nuts M3
8.1: First, secure the Shock Absorbers -60003- to the Lower Susp. Arms using
Cap Head Self-tapping Screws 3*16 -60081- though the brass shock ball. The
screw should go in the center hole for now, this is true for both front and
rear.
8.2: Push the Round Head Screws 3*25 18044 though the suitable hole in the Shock Tower, mount
the Steel Shock Ball on the Shock Absorber on the screw, and place a washer and M3 nut before
securing. For the front the Shock Absorber should be fastened in the uppermost of the 6 holes where
the Body Post Mount is, while for the rear it should be mounted in the center lower hole where the
Body Post Mount is, as shown in pictures.
