4.6: Fasten the Bumper support to the Shock Tower with 4
Self-tapping Screws 3*42 and the 4 plastic cylinders, as
shown in the picture. To mount the Front Bumper –this is
the one with the extra metal plate on it-, slide it under the
Susp. Arm Holder just mounted and fix from bellow with the
Self-tapping Screws 3*16 from bag 9. Some force may be
needed to push the part properly into place.
4.7: Open bag 16, and pick the Front Sway Bar –this is the shorter of the two, without the additional
bend on the ends. First attach it to the Lower Susp. Arms with Mech Screws 3*16 and in the correct
holes as shown, and then fix it to the font of the Gear Box with the small plastic Fasteners and
Screws. Finally, fix the Bumper Support to the Front Bumper with Self-tapping Screws 3*10 from bag
18.
