2.0: Steering Saver Assembly
Youtube guide for this stage:
Requires following bags:
2:
60014 Steering/Saver Complete
60016 Servo Saver
3:
60015 Steering Post
60083 Cap Head Mech Screw 3*10
13:
60030 Steering Link
60041 Shock Balls Ø5.8
20:
SP9001 Steering Servo 9KG Waterproof
60023 Radio Plate Post
61024 Countersunk Mech Screw 3*8
24:
61002 Side Guards
60111 Countersunk Self-tapping Screw 3*8
2.1: To start, open bag 3 containing two metal posts and screws. These will be mounted in the two
holes just behind the Front Gear Box, using the Countersunk Mech Screws 3*10 from bag 9 in the
previous step.
2.2: Open bag 2 and start by placing a Brass Oil Bearing in each end of the metal cylinder and the
equally long narrow plastic cylinder as shown in pictures. Next there are two short plastic cylinders,
each with an arm, that will fit over the metal cylinder. Notice that the slightly longer of the two
pieces goes on first, and that it has a hexagonal internal shape on the bottom that will lock into the
hexagonal bottom of the metal cylinder. Place the second plastic part over it, with its arm facing left
when the arm of the first piece is facing towards you.
Place the spring on top –may require some force to
move it down the cylinder- and finally the threaded
tension cap on top of the spring. This cap is tightened
or loosened to adjust the tolerance of the Steering
Saver; we will tighten this properly when doing final
preparations.
