2.3: Place each of the cylinders onto the metal posts mounted on the Chassis in 2.1, the large two-
armed one should be on the left side and the narrow one on the right when the car is facing you, as
shown in pictures. Now fasten the remaining plastic part to the closest hole on each of the servo
posts arms, using the Hex-key half threaded Mech Screws. Make sure the screws are not too tight,
and that the Steering Saver Assembly rotates freely. Using one of the remaining Mech Screws, fasten
the metal Shock Ball to the arm as shown in picture.
2.4: Open bag 13 and fasten the Steering Links to the
Steering Assembly arms as shown in picture, using the
remaining two screws from bag 2, used in the previous steps.
2.5: Open bag 24 and fasten the Side Guards to the Chassis
using the screws included. Notice that the end of the Side
Guards that have a longer narrow piece is the front, while
the shorter curved part with the step is the back. Each part is
mounted using 4 self-tapping 3*8 screws, as shown in
pictures.