ProSoft MVI56-PDPMV1, Руководство пользователя

Страница: 19 / 251

MVI56-PDPMV1 ♦ ControlLogix Platform Start Here
PROFIBUS DPV1 Master User Manual
Page 19 of 251 ProSoft Technology, Inc.
1.5.4 Sample Program Summary
Use the following table to determine which sample program to use for your
application.
ControlLogix
Version Sample Ladder Add-On Instruction
15 or older MVI56_PDPMV1_FLEX.ACD -
15 or older MVI56_PDPMV1_LEGACY.ACD -
16 or newer - MVI56PDPMV1_FLEX_AddOn_Rung_v1_x.L5X
16 or newer - MVI56PDPMV1_LEGACY_AddOn_Rung_v1_x.L5X
Note: For ControlLogix version 16, you will use the Add-On Instruction (AOI) rung import (.L5X)
files, which encapsulate all the required ladder logic, controller tags, and user-defined data types
into a single import file; or you can use the ladder logic sample files (.ACD), which already have the
AOI files imported. The .ACD files use the same logic as the AOI versions but display them as
standard ladder logic.
The separate AOI .L5K file exists to make it easier to import the sample application into an existing
project or new project file. You do not need to import the AOI .L5K files into any of the .ACD ladder
logic sample programs. ControlLogix versions 15 and earlier do not support Add-On Instructions;
so do not try to import the AOI .L5K files into those older versions of RSLogix 5000.

For ControlLogix firmware version 16 or newer, refer to Using the MVI56-PDPMV1 Add-On
Instruction (page 20).

For ControlLogix firmware version 15 or older, Using the MVI56-PDPMV1 Sample Ladder
Logic (page 19).
1.6 Using the MVI56-PDPMV1 Sample Ladder Logic
If you will be using ControlLogix firmware versions 16 or newer, you may skip to
the section on Using the MVI56-PDPMV1 Add-On Instruction (page 20).
If you will be using ControlLogix firmware versions 15 or older, follow this
procedure:
1 Copy any of the sample program
s to
a convenient folder on your local
PC hard drive.
2 Start RSLogix 5000 and close any project or programs that may open
automatically when the program starts.
3 On the F
ILE
menu, click the O
PEN
button.
4 Browse to the location where you saved the sample program files on your
local drive and select (left-mouse-click) the one that matches your firmware
version of your ControlLogix processor firmware.
5 Left-click the O
PEN
button.
6 RSLogix will load the sample program.
The next step is to configure the correct controller type and slot number for your
application. For details, skip to the section on Common Settings for All Sample
Programs (page 66).