MVI56-DNP
♦
ControlLogix Platform
Configuring the MVI56-DNP Module
DNP 3.0 Server
User Manual
ProSoft Technology, Inc.
Page 47 of 171
July 21, 2011
Point Count
This parameter defines the number of points in the IED unit that will be affected
by the command. Refer to the discussion in the Command List topic, above, to
interpret this parameter’s meaning for the different
Object
types.
DNP DB Address
This parameter defines the starting point address in the DNP database for the
command. If the parameter has a value of -1, the DNP database is not used with
the point.
IED DB Address
This parameter defines the starting point address in the IED database for the
command. If the parameter has a value of -1, the IED database is not used with
the point.
Poll Interval
This parameter specifies the minimum frequency at which the module should
execute the command. The value is entered in units of seconds. For example, to
execute a command every 10 seconds, enter a value of 10 in this field. A value of
0 for the parameter implies that the command should be executed every scan of
the list, as often as possible.
