Proroute GEM420 4G M2M Router
GEM420 User Manual
74
connection will generate a new profile.
3. Configuration Mode
: Select your Configuration Mode from “Registrar” or
“Enrollee”. In most cases, for an AP router or AP, it should be in “Registrar” mode,
so that other wireless clients in “Enrollee” mode can connect to the discovered
“Registrar”. Briefly specking, “Enrollee” is the initiator of WPS connection.
Registrar Mode
Enrollee Mode
4. Push-button WPS Trigger [Registrar Mode]
: Press this button to simulate you
have push WPS button and let wireless clients to connect to this gateway in WPS
PBC mode.
5. Allowed STA PIN Code [Registrar Mode]
: Fill the PIN code of device, so all STA
clients can operate the WPS process to the device with the certificated code.
6. AP PIN Code & New Generate [Enrollee Mode]
: This PIN number is required for
WiFi client during WPS connection. You can press “New Generate” to get a new
AP PIN.
7. WPS status
: According to your setting and activity, the status will show “IDLE”,
“STARTPROCESS”, or “NOT USED”. The status is “IDLE” by default. If you want
to start a WPS connection, you need to push “Trigger” button to change its status
to “STARTPROCESS”. Only one wireless client is allowed for each WPS
connection.
If you want to start a WPS connection, you can click on the “
Trigger
” button of this
device to change the WPS status to “STARTPROCESS” and then initiate the WPS
process on other wireless client devices in two minutes to make the client device
connected to the activated WLAN.
3.1.3.2 Wireless Client List
In
“Wireless Client List”
page, the list of connected wireless clients will be shown
consequently. You can choose to see “All” of connected wireless clients, or you can
indicate which virtual AP (SSID) you want to browse. You can check wireless clients
of VAP-1~VAP-8 individually.
