Proroute GEM420 4G M2M Router
GEM420 User Manual
131
2.
Server Virtual IP:
It is the virtual IP address of PPTP server used in PPTP
tunneling. This IP address should be different from the gateway one and
members of LAN subnet of Business Security Gateway.
3.
IP Pool Starting Address:
This device will assign an IP address for each remote
PPTP client. This value indicates the beginning of IP pool.
4.
IP Pool Ending Address:
This device will assign an IP address for each remote
PPTP client. This value indicates the end of IP pool.
5.
Authentication Protocol:
You can choose authentication protocol as PAP,
CHAP, MS-CHAP, or MS-CHAP v2.
6.
MPPE Encryption:
Check the “Enable” box to activate MPPE encryption.
Please note that MPPE needs to work with MS-CHAP or MS-CHAP v2
authentication method. In the meantime, you also can choose encryption length
of MPPE encryption, 40 bits, 56 bits or 128 bits.
3.2.3.2.3 PPTP Server Status
The user name and connection information for each connected PPTP client to the
PPTP server of the Business Security Gateway will be shown in this table.
1.
Refresh:
To refresh the PPTP Server Status each 2 seconds by clicking on the
“Refresh” button.
2.
Disconnect:
To terminate the connection between PPTP server and remote
dialing in PPTP clients by clicking on the “Disconnect” button.
3.2.3.2.4 User Account List
You can input up to 10 different user accounts for dialing in PPTP server.
1.
Add:
You can add one new user account by clicking on the “Add” button.
2.
Delete:
Delete selected user accounts by checking the “Select” box at the end of
each user account list and then clicking on the “Delete” button.
3. Enable:
Check the “Enable” box to validate the user account.
4. Edit:
You can edit one user account configuration by clicking on the “Edit” button
