Proroute GEM420 4G M2M Router
GEM420 User Manual
68
1. Wireless Module:
Enable the wireless function.
2. Wireless Operation Mode
: Choose “WDS Only Mode” from the drop list.
3. Lazy Mode:
This device support the Lazy Mode to automatically learn the MAC
address of WDS peers, you don’t have to input other peer AP's MAC address.
However, not all the APs can be set to enable the Lazy mode simultaneously; at
least there must be one AP with all the WDS peers’ MAC address filled.
4. Green AP:
Enable the Green AP function to reduce the power consumption when
there are no wireless traffics.
5. Channel:
The radio channel number. The permissible channels depend on the
Regulatory Domain. The factory default setting is auto channel selection.
6. Authentication & Encryption:
You may select one of the following
authentications to secure your wireless network: Open, Shared, Auto, WPA-PSK
and WPA2-PSK.
Open
Open system authentication simply consists of two communications. The first is
an authentication request by the client that contains the station ID (typically the
MAC address). This is followed by an authentication response from the
