Proroute GEM420 Скачать руководство пользователя

Страница: 62 / 166

Proroute GEM420 4G M2M Router

GEM420 User Manual

By default, all the LAN ports and virtual APs belong to one VLAN, and this VLAN ID is

forced to “1”. It is a special tag based VLAN for device to operated, there is no tag

required for this default VLAN ID.

If you want to configure your own tag-based VLANs, click on the “Edit” checkbox on a

new VLAN ID row.

1. VLAN ID

: Specify a VLAN tag for this VLAN group. The ports with the same VID

are in the same VLAN group.

2. Internet

: Specify whether this VLAN group can access Internet or not. If it is

checked, all the packet will be un-tagged before it is forward to Internet, and all the

packets from Internet will be tagged with the VLAN ID before it is forward to the

destination belongs to this configuring VLAN group in the Intranet.

3. Port-1 ~ Port-4, VAP-1 ~ VAP-8

: Specify whether they belong to the VLAN group

or not. You just have to check the boxes for dedicated ports.

4. DHCP Server

: Specify a DHCP server for the configuring VLAN. This device

provides up to 4 DHCP servers to serve the DHCP requests from different VLANs.

Afterwards, click on “Save” to store your settings or click “Undo” to give up the

changes.

3.1.3 WiFi Setup

The gateway supports 2.4GHz 802.11n 2Tx2R MIMO WiFi, and also can be back

compatible to 802.11b/g clients. WiFi settings allow you to set the wireless LAN

configuration items. When the wireless configuration is done, your WiFi LAN is ready

to support your local WiFi devices such as your laptop PC, smart phone, tablet,

wireless printer and some portable wireless devices.

Содержание GEM420







































































































































































Результаты поиска

Содержание GEM420

Отзывы:

Похожие инструкции для GEM420

Бренды по названию

Популярные бренды

Proroute GEM420, Руководство пользователя

Результаты поиска

Содержание GEM420

Отзывы:

Похожие инструкции для GEM420

Бренды по названию

Популярные бренды