Proroute GEM420 4G M2M Router
GEM420 User Manual
51
record this keep-alive check is failed if the response time of replied packet is
longer than this setting.
Fail Threshold
: Times of failed checking. This WAN connection will be
recognized as broken if the times of continuous failed keep-alive checking
equals to this value.
Target1/Target2
: Set host that is used for keep alive checking. It can be
DNS1, DNS2, default Gateway, or other host that you need to input IP
address manually.
10.
IGMP:
Enable or disable multicast traffics from Internet. You may enable as
auto mode or select by IGMP v1, IGMP v2, IGMP v3 or Auto.
11.
WAN IP Alias:
In some cases, ISP will provide you another fixed IP address
for management purpose. You can enter that IP address in this field.
3.1.1.3 Load Balance
This device support multi-WAN load balance function and more than one WAN
interface can access to Internet at a time. The load balance function can help you to
manage the outbound traffics and to maximize the utilization of available bandwidth.
1. Load Balance:
Enable or disable the load balance function.
2. Load Balance Strategy:
Once you enabled the load balance function, you have
to further configure which strategy is to be applied for load balancing the
outbound traffics. There are three load balance strategy: “
By Smart Weight
”,
“
By Priority
”, and “
By User Policy
”.
By Smart Weight
If you choose the “
By Smart Weight
” strategy, No any other setting is required. This
