Proroute GEM420 4G M2M Router
GEM420 User Manual
159
System Time
There are three approaches to setup the system time. Before the process, some basic
information must be filled by clicking on the “Configure” command button. Basic
information includes following items:
1. Time Zone:
Select a time zone where this device locates.
2. Auto-synchronization
: Check the “Enable” checkbox to enable this function.
Besides, you can select a NTP time server to consult UTC time from the available
list and by default, it is “Auto” to let system query pre-defined NTP servers for the
system time one after one.
3. Daylight Saving Time:
Check the “Enable” checkbox to enable this function.
4. Set Date & Time Manually:
Set the date and time for system by manual. But
Auto-Synchronization must be unchecked beforehand to do it.
Above is the first way to setup system date and time. That is, it is the manual way. The
second way is “Sync with Timer Server”. Based on your selection of time server in
basic information configuration, system will communicate with time server by NTP
Protocol to get system date and time after you click on the button. The last way is
