Proroute GEM420 4G M2M Router
GEM420 User Manual
82
announcing the IP address of that interface. Hosts discover the addresses of their
neighboring routers simply by listening for advertisements. When a host attached
to a multicast link starts up, it may multicast a Router Solicitation to ask for
immediate advertisements, rather than waiting for the next periodic ones to arrive;
if and only if no advertisements are forthcoming, the host may retransmit the
solicitation a small number of times, but then must desist from sending any more
solicitations. Any routers that subsequently start up, or that were not discovered
because of packet loss or temporary link partitioning, are eventually discovered by
reception of their periodic (unsolicited) advertisements.
3.1.4.3 PPPoEv6
When “PPPoEv6” is selected for the WAN Connection Type, you need to do the
following settings:
PPPoEv6 WAN Type Configuration
1. Account:
enter the Username that you got from your ISP
2. Password:
enter the Password that you got from your ISP
3. Service Name:
enter the Service Name that you got from your ISP
4. Connection Control:
leave the setting as “Auto-reconnect (Always on)”
5. MTU (Maximum Transmission Unit):
Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
6. MLD Snooping:
MLD snooping, IPv6 multicast data is selectively forwarded to a
list of ports that want to receive the data, instead of being flooded to all ports in a
VLAN. This list is constructed by snooping IPv6 multicast control packets. If
necessary in your environment, please enable this feature.
