Proroute GEM420 4G M2M Router
GEM420 User Manual
71
1. Wireless Module:
Enable the wireless function.
2. Wireless Operation Mode
: Choose “WDS Hybrid Mode” from the drop list.
3. Lazy Mode:
This device support the Lazy Mode to automatically learn the MAC
address of WDS peers, you don’t have to input other peer AP's MAC address.
However, not all the APs can be set to enable the Lazy Mode simultaneously; at
least there must be one AP with all the WDS peers’ MAC address filled.
4. Green AP:
Enable the Green AP function to reduce the power consumption when
there is no wireless traffics.
5. Multiple AP Names:
This device supports up to 8 SSIDs for you to manage your
wireless network. You can select VAP-1 ~ VAP-8 and configure each wireless
network if it is required.
6. Time Schedule:
The wireless radio can be turn on according to the schedule rule
you specified. By default, the wireless radio is always turned on when the wireless
module is enabled. If you want to add a new schedule rule, please go to
System
->
Scheduling
menu.
7. Network ID (SSID):
Network ID is used for identifying the Wireless LAN (WLAN).
Client stations can roam freely over this device and other Access Points that have
the same Network ID. (The factory default setting is “default”)
8. SSID Broadcast:
The router will broadcast beacons that have some information,
including SSID so that wireless clients can know how many AP devices by
scanning the network. Therefore, if this setting is configured as “Disable”, the
wireless clients can’t find the device from beacons.
9. Channel:
The radio channel number. The permissible channels depend on the
Regulatory Domain. This channel number needs to be same as the channel
number of peer AP.
10. Authentication & Encryption:
You may select one of the following
authentications to secure your wireless network: Open, Shared, Auto, WPA-PSK
