Proroute GEM420 4G M2M Router
GEM420 User Manual
53
1. Source IP Address
: Enter the expected Source IP Address for the load balance
policy. It can be “Any”, “Subnet”, “IP Range”, or “Single IP”. Just choose one type
of the source IP address, and specify its value as well. If you don’t want to specify
a certain source IP address for this policy, just leave it as “Any”.
2. Destination IP Address
: Enter the expected Destination IP Address for the load
balance policy. It can be “Any”, “Subnet”, “IP Range”, “Single IP”, or “Domain
Name”. Just choose one type of the destination IP address, and specify its value
as well. If you don’t want to specify a certain destination IP address for this policy,
just leave it as “Any”.
3. Destination Port
: Enter the expected Destination Port number for the load
balance policy. It can be “All”, “Port Range”, “Single Port”, or “Well-known
Applications”. Just choose one type of the destination port, and specify its value
as well. If you don’t want to specify a certain destination port for this policy, just
leave it as “All”.
4. Protocol
: Enter the expected protocol type for the load balance policy. It can be
“TCP”, “UDP” or “Both”. If you don’t want to specify a certain protocol type for this
policy, just leave it as “Both”.
5. WAN Interface
: Identify which WAN interface is to be selected for accessing the
Internet if all of above source and destination criteria are matched for the
outbound traffics.
6. Policy
: Enable or disable this user policy.
3.1.2 LAN & VLAN Setup
This device is equipped with four Fast Ethernet LAN
ports as to connect your local
devices via Ethernet cables. Besides, VLAN function is provided to organize your
10 The 1
st
Ethernet port will be configured to WAN port if you have set Ethernet WAN.
