Proroute GEM420 4G M2M Router
GEM420 User Manual
64
This mode allows you to get your wired and wireless devices connected with NAT.
In this mode, this gateway is working as a WiFi AP, but also a WiFi hotspot. It means
local WiFi clients can associate to it, and go to Internet. With its NAT mechanism, all of
wireless clients don’t need to get public IP addresses from ISP.
1. Operation Band:
Select the WiFi operation band that you want to configure. But
the device supports only 2.4G single WiFi band.
2. WPS
: Click on the button to setup WPS.
1. Wireless Module:
Enable the wireless function.
2. Wireless Operation Mode
: Choose “AP Router Mode” from the drop list.
3. Green AP:
Enable the Green AP function to reduce the power consumption when
there is no wireless traffic. By default, it is disabled.
