PRONAR T185/1 Скачать руководство пользователя страница 87

Страница: 87 / 156

Rozdział 4

4.21

PRONAR T185/1

Terms of use

When removing, make sure that
the container side members do
not stick to the trailer rollers. If
so, stop swinging the middle
frame and move the hook frame
forward, thus lifting the front of

the container. When the front of
the container is over the rollers,
you can resume tilting the middle
frame

• After placing the container on the

ground, stop swinging the middle
frame.

• Set the hook frame in a position that

will allow the hook to be discon-
nected from the container, and then
move away from the container to di-
sconnect it.

• Fold the hook frame and middle

frame.

•

Insert the suspension interlock
cylinders.

• Fit the slow-moving vehicle warning

sign.

H.3.4.622.06.1.EN

CAUTION

When disconnecting the container, make sure that be-

fore lowering the container to the ground it does not hit

the trailer’s structural elements.

CAUTION

When removing the container, make sure that the con-

tainer side members do not stick to the trailer rollers. If

so, stop swinging the middle frame and move the hook

frame forward, thus lifting the front of the container.

Failure to comply may result in unhooking the conta-

iner, damage to the trailer.

622-H.21-1

Figure 4.21

Container detachment

Содержание T185/1





























































































































































Результаты поиска

Содержание T185/1

Отзывы:

PRONAR T185/1, Руководство пользователя, Страница: 87 / 156

Результаты поиска

Содержание T185/1

Отзывы: