PRONAR T185/1 Скачать руководство пользователя страница 47

Страница: 47 / 156

Chapter 2

2.17

PRONAR T185/1

Safety of use

Table 2.1.

Information and warning stickers

No.

Description

Catalogue number

Warning! Before starting work, read the User’s Manual

70RPN-00.00.00.04

Before starting servicing or repair work, switch off tractor engi-
ne and remove key from ignition.
Secure the tractor cab against access by unauthorized per-
sons

70RPN-00.00.00.05

Warning sticker. It is forbidden to carry out maintenance or
repair work under a loaded and/or unsupported container.

104N-00000003

Lubricate the trailer according to the schedule outlined in the
User’s Manual.

104RPN-00.00.00.04

Information sticker. Information on the possibility of using the
swing frame lock depending on its position

104N-00000005

Information sticker. Regularly check the tightness of the wheel
nuts and other bolted connections..

104RPN-00.00.00.06

Information sticker. Swing frame lock. Position I. Container
swing.

104N-00000007

Information sticker. Unlocking the middle frame. Position II.
Container disconnection/attachment.

104N-00000008

Cable function sticker

622N-03000001

Information sticker. Information about the currently set trailer
function:

- „hook”
- „trailer”.

385N-03000002

„Machine type” sticker (left and right).

622N-00000001 (L)
622N-00000002 (R)

Содержание T185/1





























































































































































Результаты поиска

Содержание T185/1

Отзывы:

PRONAR T185/1, Руководство пользователя, Страница: 47 / 156

Результаты поиска

Содержание T185/1

Отзывы: