PRONAR T185/1, Руководство пользователя, Страница: 84 / 156

Rozdział 4 Terms of use
4.18
PRONAR T185/1
the container in a straight line, about
1 meter from the container hitch.
• Fold out the hook frame as much as
possible.
• Swivel the middle frame into the po-
sition in which the hook will be at the
height of the hitch in the container.
• Reverse the trailer to such a position
that it is possible to hook the con-
tainer, Figure (4.16).
• Fold the hook frame up partially until
the front of the container slightly lifts.
• Fold the middle frame to its original
position - Figure (4.17)
Make sure that the container
side members do not catch the
trailer rollers. If so, stop folding
the middle frame. Raise the
front of the container slightly by
folding the hook frame. As soon
as the container side members
are above the rollers, the middle
frame folding can be resumed
• After folding the middle frame to its
original position, fully fold the hook
frame.
• Insert the suspension interlock
cylinders.
CAUTION
When pulling the container in, make sure that the
container side members do not stick to the trailer
rollers. If so, stop folding the middle frame. Raise
the front of the container slightly by folding the hook
frame.
Failure to comply may result in unhooking the conta-
iner, damage to the trailer.
622-H.17-1
622-H.16-1
Figure 4.16
Container connecting
Figure 4.17 Container pulling