PRONAR T185/1 Скачать руководство пользователя страница 77

Страница: 77 / 156

Rozdział 4

4.11

PRONAR T185/1

Terms of use

connector, connect the wires to
one section. The section control
lever on the tractor must have
the latch in the on position.

• In the case of a hydraulic system with

an oil tank, also connect the articu-
lated telescopic shaft.

CONNECTION OF ELECTRIC LI-
GHTING SYSTEM

• Connect the main cable (1) supplying

the lighting electrical system (7-pin)
and connection cable (2) of the hy-
draulic system (3-pin) to the sockets
on the tractor.

If the tractor does not have such
or the sockets are of a different
type then assembly should

be carried out by a qualified

person in accordance with the
recommendations of the tractor
manufacturer.

ADDITIONAL INFORMATION

• After completing the connection of all

hoses, make sure that they will not
become entangled in moving parts of
the tractor or trailer during operation.
Secure the cables as necessary.

• Perform a daily inspection of the

trailer.

• If the trailer is functional, you can

start working.

• Remove the wheel chocks and re-

lease the machine’s parking brake
immediately before starting to drive.
Ensure suspension cylinders are
retracted.

Turn the crank handle anti-cloc-
kwise as far as it will go.

CAUTION

After completing the coupling, secure the hydraulic,

braking and electrical lines in such a way that they

do not become entangled in the moving parts of the

agricultural tractor during travel and are not subject

to kinking or cutting when turning.

622-H.10-1

Figure 4.10

Electrical connections

(1) 7-pin cable

(2) 3-pin cable

Содержание T185/1





























































































































































Результаты поиска

Содержание T185/1

Отзывы:

PRONAR T185/1, Руководство пользователя, Страница: 77 / 156

Результаты поиска

Содержание T185/1

Отзывы: