PRONAR T185/1, Руководство пользователя, Страница: 83 / 156

Rozdział 4
4.17
PRONAR T185/1
Terms of use
4.5 PULLING IN THE CONTAINER
• Retract the rear beam and remove
the slow-moving vehicle warning
plate.
• If necessary, adjust the position of
the hook by setting the appropriate
height.
• Lock the suspension using the su-
spension interlock system cylinders.
• Switch the trailer to the „hook lift”
function. Correct switching will be in-
dicated by a lamp next to the „hooklift”
symbol. In this function, the container
lock will be unlocked (optional for hy-
draulic function switching with con-
tainer lock).
In a system with manual hook
lift / tipper switch, pull back the
locking bolt (2) - Figure (4.14)
and move the lever (1) to po-
sition (II) „hook lift”.
• Make sure the container lock is
retracted.
• Place the tractor and trailer in front of
CAUTION
After moving the lever to position (II) make sure that
the locking pin (2) correctly secures the lever against
uncontrolled movement.
CAUTION
Container must be lifted/removed on a flat, level, le-
vel surface.
If the trailer or container tilts to the side when the
container is being pulled in or is not in the axis of
symmetry of the trailer, stop connecting and remove
the container.
II
1
2
622-H.14-1
Figure 4.14 Setting the trailer’s operating mode
(1) lever (2) interlocking
622-H.15-1
1 2
Figure 4.15 Unfolding of the frames
(1) hook frame (2) internal frame