PRONAR T185/1, Руководство пользователя, Страница: 39 / 156

Chapter 2
2.9
PRONAR T185/1
Safety of use
may endanger the health or life of
bystanders or persons operating the
trailer, cause damage to the machine
and constitute the basis for loss of
warranty.
• Before welding or electrical work, the
trailer should be disconnected from
the power supply. The paint coating
should be cleaned.
• The fumes of burning paint are po-
isonous to humans and animals.
Welding work should be carried out
in a well-lit and ventilated room.
• During welding work pay attention
to flammable or fusible elements
(elements of pneumatic, electric, hy-
draulic systems, elements made of
plastic). If there is a risk of ignition or
damage, they must be removed or
covered with non-flammable material
before welding. Before starting work,
it is recommended to prepare a CO2
fire extinguisher or foam extinguisher.
• In the event of work requiring the
trailer to be raised, use properly cer-
tified hydraulic or mechanical lifts for
this purpose. After lifting the machine,
stable and durable supports must
also be used. It is forbidden to work
under a trailer raised only with a jack.
• It is forbidden to support the trailer
with fragile elements (bricks, blocks,
concrete blocks).
• After completing work associated with
lubrication, remove excess grease or
oil. The trailer should be kept clean.
• It is forbidden to carry out inde-
pendent repairs of hydraulic or pneu-
matic system components, i.e. control
valves, actuators and regulators. In
case of damage to these elements,
the repair should be entrusted to au-
thorized repair centres or replace the
elements with new ones.
• It is prohibited to install additional
devices or accessories that do not
comply with the specifications spe -
cified by the Manufacturer.
• The trailer may only be towed if the
chassis, lighting and braking systems
are functional.
F.3.4.622.06.1.EN
Figure 2.1
The locking wedges positions
622-F.01-1