manualshive.com logo in svg

PRONAR T185/1, Руководство пользователя, Страница: 5 / 156

Поделиться
Скачать
PRONAR T185/1 Скачать руководство пользователя страница 5

3

PRONAR T185/1

Introduction

SYMBOLS USED IN THE MANUAL

DANGER

Information, descriptions of hazards and 
precautions  as well as instructions and 
orders related to the safety of use in the 
contents of the manual are marked with 
a frame with the word DANGER. Non-
compliance with the recommendations de-
scribed will endanger the health or life of 
persons using the machine or bystanders.

CAUTION

Particularly important information and re-
commendations, the observance of which 
is absolutely necessary, are highlighted 
in the text with a frame saying CAUTION. 
Failure to comply with these recommen-
dations creates the risk of damage to the 
machine as a result of incorrect handling, 
adjustment or use.

ADVICE

Additional instructions contained in the 
manual describe useful information on the 
operation of the machine and are marked 
with a frame with the word ADVICE

.

U.02.1.EN

 DANGER

 CAUTION

 ADVICE

Содержание T185/1





























































































































































Отзывы:

Нет отзывов