PRONAR T185/1, Руководство пользователя, Страница: 20 / 156

Chapter 1 General information
1.4
PRONAR T185/1
1.3 INTENDED USE
The hook trailer is designed and adapted
to cooperate with containers with execu-
tions in accordance with the standards:
• DIN30722-1
• SS3021 (after retrofitting the trailer
with a hydraulic blockade whose
permissible dimensions are
specified in the table (1.2).
A necessary condition for proper coope-
ration of the trailer with containers made
according to the SS3021 standard is to
equip the trailer with a hydraulic container
lock.
The design of the trailer enables the at-
tachment and disconnection of containers
and their unloading by swing backwards.
The type of cargo carried depends on the
intended use of the container.
Using the trailer in a different way than
CAUTION
It is forbidden to use technically defective conta-
iners. The container should have adequate strength
at which it can be loaded and unloaded at full load.
CAUTION
The trailer speed must not be greater than the maxi-
mum design speed of 40 km/h.
DANGER
The machine may not be used for purposes other
than those for which it was intended..
Requirements [mm]
Minimum hitch height h 1 450
Maximum hitch height h 1 570
Roll spacing w 1 070
Minimum overall length L 4 400
Maximum overall length L 4 900
Maximum overall width W 2 550
Maximum overall height H 2 000
L
W
h
H
w
Table 1.2. Container requirements
Figure 1.3 Container size