ProMinent Aegis-II, Руководство по сборке и эксплуатации, Страница: 90 / 102

System Menu
Page 90 of 102
your password from either place.
Operator level users can see the program
parameters but not edit them.
Configure level users and change all programming
but cannot edit system parameters.
The Admin user can edit all user parameters.
There is not mfg password. If you forget your
password, Prominent can reset the password list. All
users would have to re-set their passwords.
Table 16 Default Users Passwords
11.2.3 Metric Units
Switch Engineering units to Metric.
11.2.4 Sunday=Day 1
Use this if you are setting up timers with a 28 day
cycle. Since a 28 day cycle has 4 weeks of timers,
setting this as week 1 lets you know that what you
set up in week 1 will happen this coming week.
(Every week is week 1 in a 7 day cycle.) See more in
section
10.6.7 Choosing a Cycle
11.2.5 Number of Systems
This is a function of the browser interface. Consult
the browser manual.
11.2.6 Alarm on Stops
Pressing the
STOP
button at any time will stop all
outputs. It will also create an alarm condition unless
you change it.
11.2.7 System Restart and Factory Reset
System Restart will reset timers and clear alarms.
Factory Reset will perform a System restart plus all
programming will be erased, the date and time will
be reset and the controller will reboot. Neither will
reset passwords nor change IP addresses.
User Default PSW
Operator 1 1
Operator 2 2
Operator 3 3
Operator 4 4
Configure 5 5
Configure 6 6
Configure 7 7
Administrator AAAA