ProMinent Aegis-II, Руководство по сборке и эксплуатации, Страница: 8 / 102

Menu Navigation
Page 8 of 102
2.1 Input/Output Status [momentary display]
1- From main display press Down arrow key to select
desired sensor
2- Use Right arrow key to momentarily see sensor
information
3- Use Left arrow key to momentarily see any output that
is tied to the selected input
4- Use
ESC
key to Exit
Note:
The momentary information will remain on the
display as long as you hold down the arrow key
2.2 Modifying the ‘Home’ Screen
1- To set (modify) the Home
Screen press
MENU
2- Use Up/Down Arrows to
navigate to System then press
OK
3- Scroll to Diagnostic then
press
OK
4- Scroll to System Diagnostic
then press
F1
, ADJUST
5- Use UP/Down Arrow keys to
select what to display on Top, Left
OLED Screen (maximum of six
parameters can be displayed on
OLED) then press
F1
SELECT, you
should see a square box appear in
front of your selection.
6- Press
F2,
NEXT. “Mid, Left”
should appear on the screen, use
UP/Down Arrow keys to select what
to display in the middle row, left
position, then press
F1
, NEXT, you
should see a square box appear in
front of your selection
7- Continue the process for the
four remaining choices, if desired.
8- Press
ESC
(Escape) when
done.