Promax RANGER Neo 2, Руководство пользователя

Страница: 263 / 349

October 2021 251 Chapter 11: CONNECTING TO EXTERNAL DEVICES
„
Through a web browser using the webControl tool by PROMAX.
„
Through a software that allows to send remote control commands (such
as hyperterminal or PuTTY).
„
Through SFTP protocol (using software such as Filezilla).
►
Meter Settings
1 From the meter access Preferences by long press on "Installations" key .
2 Go to "Network" where you can find all parameters to login into a network.
3 Select DHCP ON, if you connect the meter to a network with a router or
server with DHCP protocol enabled. Then the network will set automatically
the parameters in the meter. If not, follow the next steps to set the meter.
4 On "IP Address" box enter the meter IP. Use an IP in the same range used
by the local network (if you do not know these data see “local network
data”). For instance, if the IP for your PC is 10.0.1.18, the meter should have
a free IP in the same range, like 10.0.1.50.
5 In the "Mask" box, enter the mask value, which should be the same as the
one used by the local network (usually 255.255.255.0).
6 To connect the meter from an external network, fill in the “Gateway” with
the info obtained from the local network.
7 Press on "Save" and then "Exit" to save changes and exit.
►
Find out Local Network Data
1 To obtain data from the Ethernet network where your meter is connected,
you should use a PC connected to this same network.
2 From the PC click on Start menu in Windows. On the Search box write CMD
and press Enter.
3 In opens a command line in a window. Write IPCONFIG and press enter.
4 It displays a window with some lines with info. On line "Local Network
Ethernet Adapter" see line "IPv4 Address". This is the local IP for your PC.
Write down this IP. Also write down "Subnet Mask" and "Default Gateway".
This data is needed to configure the meter by hand.