Promax RANGER Neo 2, Руководство пользователя

Страница: 124 / 349

Chapter 5: TOOLS 112 October 2021
„
Pressing this option the current power values are captured and they
are assigned as reference values.
„
Access the Tools main menu.
„
Access the Advanced menu.
In the Advanced menu there are five parameters to set the attenuation test.
They are:
„
Threshold Attenuation: It defines the maximum difference that may exist
between the pilot signal of higher level and the pilot signal of lower level.
All pilot signals out of this range will be removed and not used as a pilot
signal during the measurement process.
„
Maximum Attenuation: It sets the attenuation level used by the
equipment to show on screen if the signal passes or fails. When the
attenuation level is below this value the message on screen is "PASS" and
when it is above this value is "FAIL".
„
Pilot 0: It defines the frequency of the pilot signal 0 (MHz).
„
Pilot 1: It defines the frequency of the pilot signal 1 (MHz).
„
Pilot 2: It defines the frequency of the pilot signal 2 (MHz).
The Signal Monitoring tool allows monitoring one locked signal or a channel plan
(several channels) by measuring its power and other parameters over time. All
this data can be visualized in the meter or downloaded to a PC and exported to
a file for later analysis.
The Signal Monitoring tool is available for all RF signals.
1 In Settings select the source of signal RF and terrestrial or satellite band.
5.9 Signal Monitoring
5.9.1 Description
Signal monitoring
S
C
A
N
5.9.2 Operation