Promax RANGER Neo 2 Скачать руководство пользователя страница 197

Страница: 197 / 349

October 2021

185

Chapter 6: WIFI MONITORING

Joystick functions:

•Joystick press: It changes mode.

-In tuning by Access Point: (-> AP -> SP ->).

-In tuning by Channel: (-> CH -> SP ->).

•Joystick left/right:

-In AP mode: It changes Access Point.

-In CH mode: It changes WiFi channel.

-In SP mode: It changes span.

•Joystick up/down: It changes reference level.

►

Tuning Menu

Press

to access this menu. It has some options to tune a channel or an access

point. Tuning menu has these options:

Channel: It allows you to select the channel to tune. After pressing it

shows available channels to select.

Channel Plan: This option allows the user to select a channel plan from the

ones available for the current installation. It is necessary a Channel Plan

to work on WiFi band. Load a WiFi channel plan if your installation does

not have any (WIFI_2_4GHZ is available by default).

Tune by: It allows the user to select between tuning by channel or tuning

by access point.

-Tuning by channel: It allows you to select a channel or jump from

channel to channel by pressing left / right. When the channel corresponds

to an Access Point central channel, the AP highlights and shows some

information on screen (RSSI and SNR).

-Tuning by AP: It allows you to select a AP or jump from AP to AP by

pressing left / right. The selected AP highlights and shows some

information on screen (RSSI and SNR).

Reference Level: It allows you to edit the reference level. The reference

level is the power range represented on the vertical axis. Reference level

can also be change using joystick up/down.

Span: It allows you to edit the span, which is the frequency range

displayed on screen. Span can also be change using joystick lefit/right in

SP mode.

Center Tuned Frequency: When selecting this option, the channel / Access

Point tuned (where the main cursor is pointing) is placed at center of the

screen. This option does not work with FULL span.

6.4.3

Menu Options

Содержание RANGER Neo 2






























































































































































































































































































































































Результаты поиска

Содержание RANGER Neo 2

Отзывы:

Похожие инструкции для RANGER Neo 2

Бренды по названию

Популярные бренды

Promax RANGER Neo 2, Руководство пользователя

Результаты поиска

Содержание RANGER Neo 2

Отзывы:

Похожие инструкции для RANGER Neo 2

Бренды по названию

Популярные бренды