Beta Draft Confidential
Network Settings Page
Basic Series Network Thermostat Configuration Guide, Release 3.0
3-29
Part No. 600-01000-201, Rev. 1
Firewall Settings
Inbound Port
Enter the IP port number to be configured on a local firewall
router to allow inbound WAN traffic access to the thermostat for
remote management.
This feature is used only by the Proliphix Remote Managment
Server. The thermostat uses this value, along with the WAN IP
address, to notify the server which port is to be used when the
server wants to contact the thermostat on an internal LAN.
wxyz
– (default = 8081) Four digit (max) standard IP port
number designation.
Web Server
HTTP Port
Enter the IP port number of the HTTP server within the
thermostat. This field defines the IP port number assigned to the
web server internal to the thermostat for remote access. (You
must click
Submit
after changing this parameter to invoke a
software reset to set the new value.)
wxyz
– Four digit (max) standard IP port number designation.
The default port number is
80
.
LAN Auto-Discovery
Broadcast Port
Allows you to specify to which port the thermostat responds to
queries when interrogated by the Device Locator program in the
Proliphix Device Utility tool. The Device Locator Program is a
utility program that allows you to auto-discover the Proliphix
devices on your network.
Security
Access Filter
Select the check box to enable
Access Filters
. The
Access Filter
restricts access to the thermostat from network devices whose IP
addresses are outside the range specified in the accompanying
fields. You can provision varying levels of security based on
combinations of the administrator/user passwords as well as
these address filter levels.
If this option level is disabled
(unchecked), the thermostat is exposed to access from all
network devices located anywhere in the IP address space
and is only protected with user/admin password
authentication.
Local Subnet
– (default is unchecked) The thermostat can be
accessed within a class C subnet. (e.g. 192.168.111.x where “x”
is 0 to 254)
Table 3-5 Network Settings Field Descriptions (Continued)
Field
Description
