Beta Draft Confidential
Status & Control Page
Basic Series Network Thermostat Configuration Guide, Release 3.0
3-11
Part No. 600-01000-201, Rev. 1
Heat
Displays the current Heat temperature setting as set within the current
Day
Class
schedule. (See
Setback Schedules Page (page 3-17)
.)
40
°
F(4.5
°
C) to 99
°
F(37
°
C)
HVAC Settings
HVAC State
Displays the current state of the heating or cooling system. If a state change
is made while viewing this page, click
Refresh
to update the status.
Heat
– Heating system is actively heating.
Aux Ht
– Heating system and auxiliary heat are actively heating. (Heat
Pump only)
Cool
– Cooling system is actively cooling.
Off
– Neither the heating system or cooling system is active (i.e. on).
HVAC Mode
Displays and controls the current mode setting for the HVAC system. The
thermostat can be configured to control the heat system only, cool system
only, automatically change over between heating and cooling systems, or
control neither system.
Off
– The thermostat is disabled from controlling either the heating or
cooling system.
Heat
– Heating system only.
Cool
– Cooling system only.
Auto
– Automatic changeover between heating and cooling systems.
Fan Relay State
Displays the current state of the HVAC fan.
Off
– The operation of the fan is off.
On
– The fan is operating.
Fan Mode
Displays and controls the current state setting for the HVAC fan.
Auto
– Heating or cooling system controls the operation of the fan.
On
– User forces the fan to the on state independent of the operation of
the HVAC system.
Alarm Status
Low Temperature
Displays the current status of the
Low Temperature
alarm condition. The
temperature has fallen below a pre-programmed limit. After this alarm
occurs, you must repair the condition which caused the temperature to fall
below the configured limit before resetting this alarm. (See
General Settings
Page (page 3-13)
.)
OK
– No
Low Temperature
alarm exists.
Alert!
– The temperature monitored within the thermostat has dropped
below the pre-set low temperature threshold.
Table 3-1 Thermostat Status Field Descriptions (Continued)
Field
Description
