Beta Draft Confidential
3-16
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
CHAPTER 3: Configuring the Thermostat Using the TMI
The TMI displays the following additional fields upon different settings and conditions of the
Filter
Reminder
state.
Filter Usage
The TMI displays this field when
Filter Reminder
in enabled.
x.x Runtime Days
– Displays a running tally of
Runtime Days
(x.x) which have elapsed since the previous
Filter Last
Replaced
date. If this value is greater than the preset
Runtime
Days
, it is displayed in
red
and an alarm is generated indicating
that the
Filter Reminder
interval has expired.
Filter Last Replaced
The TMI displays this field when
Filter Reminder
is enabled.
Filter Replaced
check box – Checking this box and then
clicking
Submit
, forces the current thermostat date and time into
the
Date and Time
field above and restarts the interval set
within the
Filter Reminder
field above. (e.g. If the filter is
changed prior to the
Filter Reminder
interval expiration,
checking this box and clicking
Submit
restarts the interval
timer.)
Date and Time
Displays the stored thermostat date and time marking the time of
the beginning of the filter change interval. This date is set after
clicking
Submit
with the
Filter Replaced
check box checked.
(e.g. If a 30
Runtime Days
interval is chosen for the
Filter
Reminder
, an alert is generated after 30 runtime days have
elapsed from this date.)
Set Date and Time
Displays the date and time of the web browser. Unaltered, this
date and time can be assigned to the thermostat by first checking
the
Set Thermostat Time
check box and clicking
Submit
. If a
different date and time is desired, you can change the date and
time field prior to checking the
Set Thermostat Time
check box
and clicking
Submit
. (You can read the date and time of the
thermostat directly at the thermostat on the
Status & Control
Screen (page 2-9)
.
US DST
Check this box to indicate whether the thermostat should adhere
to the Unites States Daylight Savings Time program, while
maintaining the date and time. U.S. Daylight Savings Time (
US
DST
) stipulates that the time shall be set ahead an hour at the
end of the first Saturday of the month of April every year. In
addition, the time shall be set back an hour at the end of the last
Saturday of the month of October every year. Check this box and
click
Submit
to observe and set
US DST
.
Table 3-2 General Settings Field Descriptions (Continued)
Field
Description
