Proliphix NT10e, Руководство по настройке

Страница: 44 / 86

Beta Draft Confidential
3-10 Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
CHAPTER 3: Configuring the Thermostat Using the TMI
Use Table 3-1 to configure the Temperature status, Schedule Settings , HVAC
Settings , and Alarm Statu s fields.
Table 3-1 Thermostat Status Field Descriptions
Field Description
Temperature
Zone Temperature Displays the current temperature of the local sensor if temperature averaging
is disabled.
Average temperature of any combination of Local, Remote Sensor #1 (RS
#1) or Remote Sensor #2 (RS #2) if temperature averaging is enabled. (See
Advanced Settings Page (page 3-30) .)
In a range of -30
°
F(-34
°
C) to 199
°
F(95
°
C)
Override Displays whether Heat or Cool Settings are different from the current
scheduled settings. Changes made to either the Heat or Cool Settings
(which force an override) remain at those settings until the next scheduled
Period change. At the Period change, the settings for either/both heat or cool
follow the schedule. (See
Schedule Settings (page 3-10) .)
Override
Cool Setting Displays the current temperature programmed for the cooling (A/C) system.
This field is disabled if the HVAC mode is set to Heat or Off. (See
HVAC
Mode (page 3-11) .) This field is not visible if the thermostat is configured to
be a heat-only controlling device. (See Advanced Settings Page (page 3-30) .)
To modify this field, use the drop-down menu to select a Cool Setting .
40
°
F(4.5
°
C) to 99
°
F(37
°
C)
Heat Setting Displays the current temperature programmed for the heating system. This
field is disabled if the HVAC mode is set to Cool or Off. (See
HVAC Mode
(page 3-11) .) This field is not visible if the thermostat is configured to be a
cool-only controlling device. (See Advanced Settings Page (page 3-30) .)
To modify this field, use the drop-down menu to select a Heat Setting .
40
°
F(4.5
°
C) to 99
°
F(37
°
C)
Hold Mode Displays the current state for both the Heat and Cool Setting . To “hold” the
current settings indefinitely or for a prescribed period of time as set on the
Advanced Settings Page (page 3-30) , use the drop-down menu and choose
„
Hold – Hold mode is enabled.
„
Off (default) – Hold mode is disabled.
Schedule Settings
Day Class / Period Displays the current settings for both the scheduled Day Class and Period .
„
Day Class – Occupied, Unoccupied, and Other
„
Period – Morn(ing), Day, Eve(ning), Night
Cool Displays the current Cool temperature setting as set within the current Day
Class schedule. (See Setback Schedules Page (page 3-17) .)
40
°
F(4.5
°
C) to 99
°
F(37
°
C)