Beta Draft Confidential
3-12
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
CHAPTER 3: Configuring the Thermostat Using the TMI
High Temperature
Displays the current status of the
High Temperature
alarm condition. The
zone temperature has risen above a pre-programmed limit. After this alarm
occurs, you must repair the condition which caused the temperature to rise
above the configured limit before resetting this alarm. (See
General Settings
Page (page 3-13)
.)
OK
– No
High Temperature
alarm exists.
Alert!
– The temperature monitored within the thermostat has risen
above the pre-set high temperature threshold.
Filter Change
Displays a reminder that the time interval between HVAC filter changes has
expired. The air filter(s) should be cleaned or replaced. You should change
the filter and then reset this timer. (See
General Settings Page (page 3-13)
.)
OK
– No filter change is required.
Required!
– The HVAC filters require changing or cleaning.
Table 3-1 Thermostat Status Field Descriptions (Continued)
Field
Description
