Beta Draft Confidential
Thermostat Screen
Basic Series Network Thermostat Configuration Guide, Release 3.0
2-5
Part No. 600-01000-201, Rev. 1
Cool Setpoint Temperature
Indicates the current cool setpoint temperature (
o
F or
o
C) as
defined by the thermostat schedule.
Note: This field is disabled if only Heat is selected in HVAC
mode. This field is not be visible if the thermostat is configured as
a heat-only thermostat.
Time
Time of day displayed in Daylight Savings Time if chosen.
Temperature Hold
Holds current temperature either permanently or for 1, 3, 8, 12, or
24 hours or until after you manually remove the Hold, after which
the temperature settings “Return” to that set in the schedule. The
Hold button toggles between Hold and Return. (See
Advanced
Settings Page
on
page 3-30
)
HVAC Activity
Displays the current state of the HVAC system. For either Fuel
Burner or Heat Pump, the LCD displays the following:
Delay
– Compressor delay is active (Heat Pump and Fuel
Burner A/C)
Heat
– Heating is active.
Aux Ht
– Auxiliary heat is active (Heat Pump only).
Cool
– Cooling is active.
HVAC Mode Control
Enables the
HVAC
screen whereby HVAC and Fan settings can
be modified (see
Figure 2-4
).
Next
Enables display of the next thermostat screen.
Period State
Displays the current scheduled Period. The four schedule Periods
are
Morn, Day, Eve
(ning) and
Night
.
Table 2-2 Thermostat Screen Options (Continued)
Field
Description
