Projectiondesign WB1920, Руководство пользователя

Страница: 18 / 62

english
18 Multi image processor User’s Guide – Getting to know the GUI
5.2.4 Using the Device View Toolbar, DVT
The Device View Desktop window has a toolbar on the left hand side, known as the Device
View Toolbar. The toolbar can be shown with or without help texts, see Figure 5-1.
Figure 5-1. Toolbars, shown with and without help texts.
Using the toolbar you can:
• Add or remove multi image processing system units from a project.
• Select or deselect all multi image processing system units on the Desktop.
• Show an information window for a selected unit. The information window shows system
status (temperature, fan operation, DVI signal detection in/out) and system versions for
software, hardware, FPGA, and more.
• Using the Configuration tool, Visual ID (on screen identification) and custom notes are
configured. System latency is also set up from this menu.
• The Basic Blend page sets the number of overlapping pixels for the selected channel(s).
The blend drop-off curve is also configured here.
• Identify is used to configure display of visual ID information, and identify units on the
Desktop. Extended visual ID mode will, in addition to showing your custom Visual ID,
show network information and serial number of the unit.
• Bypass sets the unit in bypass mode. No processing occurs.
• Online. This switches the processor to full processing mode. The signal on the DVI input
will be processed according to set calibration and passed to the DVI output connector.
• Mute or unmute more units
Most of the features accessed from the toolbar menu are also available by right-clicking a
selected unit, and choosing it from the context sensitive menu that shows up.