Projectiondesign WB1920 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 62

background image

english

25

www.projectiondesign.com

•

Show info labels. Show extra info for selected control point.

•

Bezier Fixed Length/Angle. Specify the bezier guide point behaviour. Off allow adjust-

ment of both length and angle. Fixed length allows the user to change angle, but not the

length. Fixed 1/3 length will fix the length to 1/3 when the control point is moved. Fixed

angle allow the user to change the length while the angle is fixed.

Figure 5-1. Bezier point settings

•

Straighten Line. Can be used to straighten selected Bezier lines (short cut key: Ctrl + L).

•

Control Point. Up, down, left and right arrows. Use to move between control points or

move a control panel one or 1/10 of a pixel.

5.4 Multi image processing operational states

Multi image processing system can operate in 4 different states: Bypass, Calibration, Online
or Auto. Switch between the different states using the action toolbar.

5.4.1 Bypass states

The DVI input signal is bypassed through the system and passed to the DVI output.

5.4.2 Calibration state

Calibration mode is used to configure the system. Different test patterns will be shown
depending on what type of calibration is being performed (warp, blend, masking etc.). The
Multi image processing system unit will automatically enter calibration state upon clicking on
any of the calibration tools in the actions toolbar.

5.4.3 Online state

In online state the DVI input signal is processed according to the calibration and sent to the
DVI output.

5.4.4 Auto state

When a calibration is completed and the accepted calibration is stored in multi image
processing system unit auto state will be used upon power up of the unit. If the multi image
processing system find a stored calibration that matches the input resolution, it will enter
online state (image processing enabled). If no calibration is found, the unit will be in bypass
state.

«
...
23
24
25
26
27
...
»

Содержание WB1920































































Отзывы:

Нет отзывов

Похожие инструкции для WB1920

Бренд: Acer Страницы: 2

Бренд: Gates Страницы: 26

Бренд: Larry vs Harry Страницы: 20

Бренд: Oce Страницы: 255

Бренд: Barco Страницы: 2

Бренд: Kargo Master Страницы: 5

Бренд: Patton electronics Страницы: 12

Бренд: Q'STRAINT Страницы: 10

Бренд: Vaillant Страницы: 80

Бренд: Bamo Страницы: 4

Бренд: Adam Страницы: 22

Бренд: BS Bodensteckdosen Systemtechnik Страницы: 14

Бренд: hepco & becker Страницы: 6

Бренд: Eiko Страницы: 21

Бренд: SRAM Страницы: 33

Бренд: FireplaceXtrordinair Страницы: 38

PhotoChrome R-38

Бренд: LYSON Страницы: 8

Бренд: Movi Страницы: 67

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды