Projectiondesign WB1920, Руководство пользователя

Страница: 51 / 62

english
51
www.projectiondesign.com
To create the next side in the zone, click on one of the control points in the first line created
(not the Bezier points) and then click
(Add) again (Figure 10-3). This will add other line to
the calibration panel. Continue to add lines as needed. All these lines have the same controls
as Bezier lines in the Mesh Bezier Warp and the Advanced Edge Blending.
Figure 10-3. Adding multiple side in a clip area.