Projectiondesign WB1920, Руководство пользователя

Страница: 59 / 62

english
59
www.projectiondesign.com
13 Table of figures
Figure 4-1. Multi image processing system overview 12
Figure 4-2. Connector panel 12
Figure 4-3. Front button and LED-indicators 13
Figure 4-4. Rack mount plate 14
Figure 4-5. Rack mounted 14
Figure 5-1. Overview of ProNet.site 15
Figure 5-1. WB calibrator, Device View. 16
Figure 5-1. File menu, Device View. 17
Figure 5-1. The Device Tree in the Device Pool. 17
Figure 5-1. Toolbars, shown with and without help texts. 18
Figure 5-1. Clearing calibration 19
Figure 5-1. Application and Network settings. 19
Figure 5-1. Multi image processing software upgrade window. 20
Figure 5-1. EDID Administration. 20
Figure 5-1. Switching views from Calibrator view to Device view and back. 21
Figure 5-1. Calibration toolbar, without and with help texts. 21
Figure 5-1. WB Navigator 22
Figure 5-1. Top toolbar window navigation 22
Figure 5-1. Calibration Panel Toolbar, without and with help texts. 23
Figure 5-1. Set colors control box 24
Figure 5-1. Control point setup 24
Figure 5-1. Bezier point settings 25
Figure 6-1. Warping algorithm setup 28
Figure 6-2. Scaling filters 29
Figure 6-3. Working with the perspective transform 30
Figure 6-4. Working with the Mesh Transform algorithm 31
Figure 6-5. Mesh Bezier with 1x1 grid 32
Figure 6-6. Working with Mesh Bezier, simple mapping 33
Figure 6-7. Real time warp state 33
Figure 6-8. Calibration panel guide points 34
Figure 7-1. Basic edge blending. 36
Figure 7-2. Adding a blend zone. 37
Figure 7-3. Add blend zone window. 38
Figure 7-4. Working with advanced edge blending. 38
Figure 7-5. Adjusting the blend drop off curve. 39
Figure 7-6. Drop-off curve setup 40
Figure 8-1. Adding test patterns 41
Figure 8-2. Test Image Setup window 41
Figure 8-3. Circle test patterns 42
Figure 8-4. Grid (Pixel) test pattern 43
Figure 8-5. Grid (Angle) test pattern 44
Figure 8-6. Disabling the warp grid 44
Figure 9-1. Start BLM tool. 45
Figure 9-1. Adding Black Level Management lines. 46
Figure 9-1. Multiple Black Level Management lines added. 46
Figure 9-1. Adjusting black level. 47
Figure 10-1. Starting the clip tool 49
Figure 10-2. Adding the first line in a clip area. 50
Figure 10-3. Adding multiple side in a clip area. 51
Figure 10-4. Clipping area complete. 52