PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 117 / 143

117
PRIMERGY BX600 Management Blade Hardware Guide
When "Management Blade Wrap Around Event Log Enable" is set to "disable" in Management Blade,
if the maximum number of event logs is reached, no more event logs can be recorded. Periodically
check "Event Log" and save or delete logs as necessary. Save by copying the screen text.
■
Set System Default (1_9)
Returns Management Blade settings to default.
❑
: Parameter
❍
: Setting at time of purchase
Parameter Setting Contents
1. Set Config Default
❍
false
❑
true
Returns settings to default. However, IP address, subnet
mask and default gateway will not return to default
settings. Also, Time Zone will become (GMT+0).
Change as necessary.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
2. Set Username/Password
Default
❍
false
❑
true
Returns user name and password to default.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
3. Set CMOS Backup Default
❍
false
❑
true
Returns CMOS Backup settings to default.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
4. Set Deployment Default
❍
false
❑
true
Returns deployment settings to default.
In order to set to default, after setting "True", reboot the
Management Blade. Settings become valid after reboot.
5. Set Switch Blade Config Default
❍
false
❑
true
This item is not supported.
Set System Default page_1_9
(1) Set Config Default : false
(2) Set Username/Password Default : false
(3) Set CMOS Backup Default : false
(4) Set Deployment Default : false
(5) Set Switch Blade Config Default : false
Enter selection or type (0) to quit:
+------------------------------------------+
| |
+------------------------------------------+