PRIMERGY BX600 S3, Руководство по оборудованию

Страница: 79 / 143

79
PRIMERGY BX600 Management Blade Hardware Guide
• 2. NTP Server IP (1_1_17_2)
Enter the IP address of the NTP server.
2. NTP Server IP
- Enter the IP address of the NTP server.
"• 2. NTP Server IP (1_1_17_2)" (p.79)
The Lastest Sync Date/Time - This displays the latest time at which Management Blades
and NTP server time synchronization was performed.
Important:
When NTP has been enabled, always check whether the time
synchronization is being performed in this display. Because straight
after setting, it sometimes takes time to display this, click the page
reload button a few times and check the display.
4. Sync Mode
❑
Sync Afterward
❑
Sync Always
Specify the time synchronization mode.
• Sync Afterward
The time of the Management Blade is synchronized to the
time of the NTP server only when the time of the NTP
server is faster.
When using this for operations that demand time to be
taken into careful consideration such as databases, select
this mode.
• Sync Always
The time of the Management Blade is synchronized with
the NTP server every 15 minutes.
Parameter Contents
1. NTP Server IP 1 Enter the IP address of the primary NTP server.
2. NTP Server IP 2 Enter the IP address of the secondary NTP server.
If an incorrect IP address is entered, time synchronization cannot be performed.
Parameter Setting Contents
+------------------------------------------+
| |
+------------------------------------------+
NTP Server IP page_1_1_17_2
(1) NTP Server IP 1 : 0.0.0.0
(2) NTP Server IP 2 : 0.0.0.0
Enter selection or type (0) to quit: